 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Reflective Photosensors (Photo Reflectors) CNB1301 (ON2171) Reflective photosensor Non-contact point SW, object sensing (C0.5) 5.00.2 4.00.2 Unit : mm (0.4) Overview CNB1301 is a reflective photosensor consisting of a small, thin reflective photosensor (CNB1302) to which a plastic lens is attached to increase the focal distance from 0.8 mm to 2.5 mm. Device center 1.05 SEC. A-A' 4.50.2 4.00.2 A 3.0 min (0.5) * Small size, light weight: 5 mm x 4.5 mm (height: 4.0 mm) * Focal distance: 2.5 mm * Visible light cutoff resin is used (2.8) Features A' 2-0.5 (1.8) 2 4 2-0.15 (4.0) * Copier * Facsimiles * Printers * Cassette deck (0.5) Applications 1 3 (3.5) Absolute Maximum Ratings Ta = 25C Parameter Input (Light Reverse voltage Power dissipation *1 Output (Photo Collector-emitter voltage transistor) (Base open) Emitter-collector voltage (Base open) Collector current Collector power dissipation *2 Temperature Operating ambient temperature Storage temperature emitting diode) Forward current Symbol VR IF PD VCEO VECO IC PC T opr Tstg Rating 3 50 75 30 5 20 50 -25 to +75 -30 to +80 Unit V mA mW V V mA mW C C 1: Anode 2: Cathode 3: Emitter 4: Collector PRSMR104RL-001 Package Note) *1: Input power derating ratio is 1.36 mW/C at Ta 25C. *2: Output power derating ratio is 0.91 mW/C at Ta 25C. Electrical-Optical Characteristics Ta = 25C 3C Parameter Input Forward voltage characteristics Reverse current Output Collector-emitter cutoff current characteristics (Base open) Transfer Collector current * characteristics Dark current Rise time Fall time Symbol VF IR ICEO IC ID tr tf IF = 50 mA VR = 3 V VCE = 10 V VCC = 5 V, IF = 10 mA, RL = 100 , d = 4 mm VCC = 5 V, IF = 10 mA, RL = 100 IF = 20 mA, IC = 0.1 mA VCC = 5 V, IC = 0.1 mA, RL = 100 20 20 0.8 Conditions Min Typ 1.3 Max 1.5 10 200 5.2 40 0.5 Unit V A nA mA A V s s Collector-emitter saturation voltage VCE(sat) Note) 1. Input and output are handled electrically. 2. This product is not designed to withstand radiation IF 3. *: Output current measurement circuit VCC IC 4 mm glass plate RL Evaporated Al Note) The part number in the parenthesis shows conventional part number. Publication date: April 2004 SHG00046BED 1 CNB1301 Collector power dissipation PC , power dissipation PD (mW) PC , PD Ta 80 PD 60 IF V F Ta = 25C 1.6 VF Ta 50 IF = 50 mA Forward current IF (mA) PC 40 Forward voltage VF (V) 60 1.2 10 mA 1 mA 0.8 40 30 20 20 0.4 10 0 -20 20 60 100 0 0 0.4 0.8 1.2 1.6 2.0 2.4 0 -40 0 40 80 Ambient temperature Ta (C) Forward voltage VF (V) Ambient temperature Ta (C) IC I F 20 VCC = 5 V Ta = 25C RL = 100 d = 4 mm 16 IC VCE d = 4 mm Ta = 25C 160 IC Ta VCC = 5 V IF = 10 mA RL = 100 120 16 12 12 20 mA 8 15 mA 10 mA Relative collector current IC (%) IF = 30 mA Collector current IC (mA) Collector current IC (mA) 80 8 4 4 40 4 mA 0 0 8 16 24 32 40 0 0 -40 0 2 4 6 8 10 12 0 40 80 Forward current IF (mA) Collector-emitter voltage VCE (V) Ambient temperature Ta (C) ICEO Ta Collector-emitter cutoff current (Base open) ICEO (A) 10 VCE = 10 V 104 tr , tf IC 100 VCC = 5 V Ta = 25C : tr : tf 103 IC d VCC = 5 V IF = 10 mA Relative collector current IC (%) Rise time tr , fall time tf (s) 1 80 d 10 -1 60 102 RL = 2 k 1 k 10 200 10 -2 40 10 -3 20 10 -4 -40 0 40 80 1 10 -2 10 -1 1 10 0 0 2 4 6 8 10 Ambient temperature Ta (C) Collector current IC (mA) Distance d (mm) 2 SHG00046BED Caution for Safety This product contains Gallium Arsenide (GaAs). DANGER GaAs powder and vapor are hazardous to human health if inhaled or ingested. Do not burn, destroy, cut, cleave off, or chemically dissolve the product. Follow related laws and ordinances for disposal. The product should be excluded form general industrial waste or household garbage. Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technical information described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the technical information as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd. 2003 SEP |
Price & Availability of ON2171
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |